Features;
New single LED chip with dual color (each lED illuminates in both White and Amber)
2 Dual Color White/Amber LED Strips
White LEDs function as DRL's (Daytime Running Lights) and Amber turn signals
When turn signal is activated strip will alternate between white and amber
120 degree viewing angle for wider visibility
Size matched for just about any fork size (even inverted forks)
Choose Smoked or Clear "D" channel lens
Size is only .325" thick x .325" wide
Industrial strength double side mounting tape on back along with a built in Zip Tie for added strength
24 gauge Teflon coated wire leads with black heat shrink sheathing
Draws less than .2 amps per foot
Input voltage of 12-15 Volts DC
Kit includes 2 Fork Light strips, Solar Circuits, 4 Posi-Tap connectors, Four 8" Zip Ties, 3M Promoter Pad
Installation:
- Measure your forks to determine proper size (see chart to the right)
- Thoroughly clean & dry forks with soap and water prior to installing
- Warm the Fork Lights until tubing and LED strip is soft and pliable
- Prior to pealing off the red strip in back of each light, bend around forks to ensure a proper fit
- Reheat strip, peal red strip off of the tape, apply to fork
- Use Zip Tie to pull the Fork Light tight to forks; Snip off excess Zip Tie end
- Refer to your motorcycle manual for turn signal and running light wiring diagram
|
Fork Sizes MM to Inches:
39mm - 1.535" dia
41mm - 1.614" dia
43mm - 1.693" dia
46mm - 1.811" dia
49mm - 1.929" dia
50mm - 1.968" dia
52mm - 1.968" dia
54mm - 2.125" dia
56mm - 2.204" dia
58mm - 2.283" dia
|